1999 Honda Accord Spark Plug Replacement Guide

Maintaining your vehicle is an incredibly rewarding task and learning how to replace your spark plugs is a great place to start. There’s a decent probability you will need to replace your old spark plugs several times over the course of owning a 1999 Honda Accord. Spark plugs are one of the most critical components inside your engine as they trigger the entire combustion process that starts and keeps your engine running for many thousands of miles. Similar to most engine components, spark plugs experience wear over time and eventually need replacement, but fortunately this is a repair you can do yourself. Odds are, if you’ve found yourself here, you have no idea how to do that, or maybe you’d just like to know what kind of spark plugs you need to buy. The entire process of changing your spark plugs should take about 20-45 minutes. This article will go over everything you will need to know about your Honda Accord’s spark plugs, whether you need some baseline information or a full, step-by-step guide to performing a spark plug change.

Correct spark plugs on a 1999 Honda Accord

This is a great option for any 1999 Honda Accord: NGK (7098) ZFR5FGP G-Power Spark Plug, Pack of 1
For any 1999 Honda Accord, you can use NGK 7098 spark plugs. These will be an exact fit and will match the required specifications of your engine. Ensure you purchase the correct number of spark plugs for your engine corresponding to the number of cylinders. Often, manufacturers will bundle spark plugs in quantities that make it nearly impossible to buy the exact amount you need for your engine. In this case, it is a good idea to purchase enough for your next two spark plug changes just so you will always have a new set ready. We always try to recommend the best possible spark plugs for the money, and these spark plugs are either a factory recomendation or an equivalent replacement available now at an affordable price.

How often should I change my spark plugs?

As a general recommendation, it is advised that you replace spark plugs once every 20,000 to 40,000 miles. Of course, please make sure to check your owner’s manual to determine the specific interval determined by Honda for the 1999 Accord. Of course, if you drive your vehicle more aggressively or own a Honda Accord with some modifications, you may want to consider changing your spark plugs closer to the 20,000 miles end of that spectrum.

However, there are also classic signs of a car that may need a spark plug replacement prematurely, such as:

  • Problems starting your engine
  • Rough idle
  • Engine misfiring

As a quick note, keep in mind that this list is of course not comprehensive, and these problems on their own do not definitively point to the spark plugs being the solitary culprit. However, the best way to prevent any issues with your vehicle is to take care of it with routine maintenance, and you are definitely doing so with the responsible decision to replace your 1999 Honda Accord’s spark plugs on a regular basis.

Changing spark plugs on a 1999 Honda Accord

This is a process you should be able to do on your own with some standard garage tools. Of course, consult your owner’s manual, as well as a factory service manual (FSM) or an equivalent Haynes or Chiltons manual. The video shown below does a good job of outlining the process.

Helpful Tools

A set of spark plug sockets is a must have. Certain spark plugs and engines make this job nearly imposible without one
As noted before, you should be able to accomplish a spark plug change with some ordinary tools you most likely already have. However, there are a few tools that are specific to this job that you may not have, and we also want to recommend some commonplace tools that you should for sure have in your toolbox if you do not already.

  • A spark plug gap tool. This allows you to check the gap of your spark plugs and change it if necessary. Most plugs will come pregapped, but if this is not the case, you should absolutely have one of these.
  • A spark plug tester – this is definitely a niche tool, but it can save you a ton of time. Although we’ve discussed spark plug replacement being a good thing to replace regularly and not just when issues occur, you may also be replacing your spark plugs because of a problem. This tool can help you diagnose the exact problem.
  • A set of spark plug sockets – These come in very handy because many standard sockets are not deep enough for spark plugs. Also, some spark plug holes are a bit smaller, so it requires a thinner wall like the one featured in the product here to fit. The linked product also features a magnet to keep a good hold of the spark plug so you do not drop it into your engine bay!
  • A torque wrench is a vital tool to have in your collection. You should check your FSM (factory service manual) to determine the correct torque rating to use when inserting the new spark plugs for your 1999 Honda Accord to be certain they are installed properly.

Tips for changing spark plugs on your 1999 Honda Accord

It is a great idea to have some dielectric grease handy.
Ensure you reference the video above before you attempt to repair the spark plugs on your 1999 Honda Accord, as well as review your FSM (factory service manual) or owner’s manual. Additionally, we have some tips below here to help you as you do this repair.

  • Take this (unofficial advice) lightly as many spark plug manufacturers advise against the use of anti-seize. However, I have heard from numerous old-school mechanics that they always apply a light coating of anti-seize to the threads of their spark plugs, especially on older vehicles.
  • First, remove the negative terminal of your battery. It is wise to disconnect the battery anytime you work on the electrical system of your Honda Accord or any other vehicle.
  • Your engine should be cold before you replace your spark plugs. Ensure you wait at least 30 minutes after any kind of operation before attempting to replace the spark plugs on your 1999 Honda Accord
  • It isn’t a bad idea to use dielectric grease when installing new spark plugs. You can apply a a little bit to the inside of the boot and the ceramic part of your spark plugs. It lessens the chance of voltage leak and helps avoid the misfortune of the boot fusing to the spark plug over time.
  • During this process, one of the most vital things to ensure you do is to avoid overtightening the plugs or worse, cracking them due to overtightenting. Use a torque wrench capable of lower, more precise torque ratings to be sure that you don’t make this mistake.

Leave a Comment