Spark plugs are one of the most critical components inside your engine that need to be maintained. There’s a decent chance you will need to replace your old and worn out spark plugs several times over the course of owning a 2015 Toyota Tacoma. Spark plugs are one of the most critical components inside your engine as they trigger the entire combustion process that starts and keeps your engine running for many thousands of miles. Like most engine components, spark plugs experience wear over time and eventually need to be swapped out for new replacements, but fortunately this is a repair you can do yourself. Odds are, if you’ve found yourself here, you have no idea how to do that, or perhaps you’d just like to know what kind of spark plugs you need to buy. The complete process of changing your spark plugs should take approximately 20-45 minutes. This article will go over everything you will need to know about your Toyota Tacoma’s spark plugs, whether you need some general information or a full, step-by-step guide to performing a spark plug change.
Correct spark plugs on a 2015 Toyota Tacoma
AUTOLITE APP5325[/caption]For any 2015 Toyota Tacoma, you can use AUTOLITE APP5325 spark plugs. These will be an exact fit and will match the required specifications of your engine. Ensure you purchase the correct quantity of spark plugs for your engine corresponding to the number of cylinders. Often, manufacturers will bundle spark plugs in quantities that make it impossible to buy the exact amount you need for your engine. In this case, it is not a bad idea to purchase enough for your next two spark plug changes just so you will always have a new set ready to go. We always try to recommend the best possible spark plugs for the money, and these spark plugs are either a factory recomendation or an equivalent replacement available now at a reasonable price.
How often should I change my spark plugs?
Generally, it is advised that you replace spark plugs once every 20,000 to 40,000 miles. Of course, please make sure to check your owner’s manual to determine the exact interval determined by Toyota for the 2015 Tacoma. Of course, if you drive your vehicle more aggressively or own a Tacoma with some modifications, you may want to consider changing your spark plugs closer to the 20,000 miles end of that spectrum.
However, there are also telltale signs of a car that may potentially need a spark plug replacement earlier than the recommended schedule, such as:
- Rough idle
- Problems starting your engine
- Engine misfiring
Note that this list is of course not comprehensive, and these problems on their own do not definitively point to the spark plugs being the solitary culprit. However, the best way to prevent any issues with your vehicle is to take care of it with regular maintenance, and you are definitely doing so with the responsible decision to replace your Toyota Tacoma’s spark plugs on a regular basis.
Changing spark plugs on a 2015 Toyota Tacoma
This is a process you should be able to do on your own with some ordinary garage tools. Of course, consult your owner’s manual, as well as a factory service manual (FSM) or an equivalent Haynes or Chiltons manual. The video shown below does a good job of outlining the process.
Helpful Tools
- A torque wrench is a very important tool to have in your toolbox. You should check your factory service manual to determine the correct torque rating to use when putting in the new spark plugs for your 2015 Toyota Tacoma to be certain they are installed properly.
- A spark plug tester – this is definitely a niche tool, but it can save you lots of time. Although we’ve discussed spark plug replacement being a good thing to replace regularly and not just when issues occur, you may also be replacing your spark plugs because of something going wrong. This tool can help you diagnose the definite problem.
- A set of spark plug sockets – These come in very handy because many standard sockets are not deep enough for spark plugs. Also, some spark plug holes are a bit smaller, so it requires a thinner wall like the one featured in the product here to fit. The linked product also features a magnet to keep a good hold of the spark plug so you do not drop it into your engine bay!
- A spark plug gap tool. This allows you to check the gap of your spark plugs and modify it if necessary. Most plugs will come pregapped, but if not, you should definitely have one of these.
- I also highly recommend you have a feeler gauge as it makes it a bit more straightforward to check the exact gap, and it comes in handy for a decent number of other jobs.
Tips for changing spark plugs on your 2015 Toyota Tacoma
- The most important thing is to avoid overtightening the plugs or worse, cracking them due to overtightenting. Use a torque wrench capable of lower, more precise torque ratings to be sure that you don’t make this mistake.
- This is not official advice as many spark plug manufacturers advise against the use of anti-seize. However, I have heard from numerous old-school mechanics that they always apply a light coating of anti-seize to the threads of their spark plugs, especially on older vehicles.
- It isn’t a bad idea to use dielectric grease when installing new spark plugs. You can apply a a very light coating to the inside of the boot and the ceramic part of your spark plugs. It lessens the chance of voltage leak and helps avoid the misfortune of the boot fusing to the spark plug over time.
- First, disconnect the negative terminal of your battery. You should always disconnect the battery anytime you work on the electrical system of your Toyota Tacoma or any other vehicle.
- Your engine should be cold before you replace your spark plugs. You should wait at least 30 minutes after any kind of operation before attempting to replace the spark plugs on your 2015 Toyota Tacoma