2015 Nissan Rogue Spark Plug Replacement Guide

It is imperative that you ensure your spark plugs are in good condition. There’s a decent probability you will need to replace your old and worn out spark plugs several times over the course of owning a 2015 Nissan Rogue. Spark plugs are one of the most critical components inside your engine as they begin the entire combustion process that starts and keeps your engine running for many thousands of miles. Similar to most engine components, spark plugs experience wear over time and eventually need to be swapped out for new replacements, but fortunately this is a repair you can do on your own. Chances are, if you’ve found yourself here, you have no idea how to do that, or maybe you’d just like to know what kind of spark plugs you need to buy. The entire process of changing your spark plugs should take about 20-45 minutes. This article will go over everything you should need to know about your Nissan Rogue’s spark plugs, whether you need some baseline information or a full, step-by-step guide to performing a spark plug change.

Correct spark plugs on a 2015 Nissan Rogue

This is a great option for any 2015 Nissan Rogue: Autolite Iridium XP Automotive Replacement Spark Plugs, XP5683 (4 Pack)
For any 2015 Nissan Rogue, you can use AUTOLITE XP5683 spark plugs. These will be an exact fit and will match the required specifications of your engine. As this 2015 Nissan Rogue features a 4 cylinder engine, ensure you purchase 4 spark plugs. We always try to recommend the best possible spark plugs for the money, and these spark plugs are either a factory recomendation or an equivalent replacement available now at an affordable price.

How often should I change my spark plugs?

As a general recommendation, it is advised that you replace spark plugs once every 20,000 to 40,000 miles. Of course, please make sure to check your owner’s manual to determine the exact interval determined by Nissan for the 2015 Rogue. Of course, if you drive your vehicle more aggressively or own a Rogue with some modifications, you may want to consider changing your spark plugs closer to the 20,000 miles end of that spectrum.

However, there are also classic signs of a car that needs a spark plug replacement early, such as:

  • Problems starting your engine
  • Rough idle
  • Engine misfiring

As a quick note, keep in mind that this list is of course not comprehensive, and these problems on their own do not necessarily point to the spark plugs being the standalone culprit. However, the best way to prevent any issues with your vehicle is to take care of it with regular maintenance, and you are definitely doing so with the responsible decision to replace your Nissan Rogue’s spark plugs on a regular basis.

Changing spark plugs on a 2015 Nissan Rogue

This is a process you should be able to do on your own with some standard garage tools. Of course, consult your owner’s manual, as well as a factory service manual (FSM) or an equivalent Haynes or Chiltons manual. The video shown below does a good job of outlining the process.

Helpful Tools

A set of spark plug sockets is extremely useful. Certain spark plugs and engines make this job impossible without one
As noted before, you should be able to do a spark plug change with some regular tools you likely already have. However, there are a few tools that are specific to this job that you may not have, and we also want to recommend some commonplace tools that you should definitely have in your toolbox if you don’t already.

  • A spark plug gap tool. This allows you to check the gap of your spark plugs and change it if necessary. Most plugs will come pregapped, but if not, you should for sure have one of these.
  • A set of spark plug sockets – These come in extremely handy because many standard sockets are not deep enough for spark plugs. Additionally, some spark plug holes are a bit smaller, so it requires a thinner wall like the one featured in the product here to fit. The linked product also features a magnet to keep a good hold of the spark plug so you do not drop it into your engine bay!
  • A spark plug tester – this is definitely a niche tool, but it can save you a ton of time. Although we’ve discussed spark plug replacement being a good thing to replace regularly and not just when issues occur, you may also be replacing your spark plugs because of a problem. This tool can help you diagnose the definite problem.
  • A torque wrench is a very important tool to have in your arsenal. You should check your FSM (factory service manual) or owner’s manual to determine the correct torque rating to use when putting in the new spark plugs for your 2015 Nissan Rogue to be certain they are installed properly.

Tips for changing spark plugs on your 2015 Nissan Rogue

It is a great idea to have some dielectric grease handy.
Please make sure you review the video above before you attempt to repair the spark plugs on your 2015 Nissan Rogue, as well as review your FSM (factory service manual). Be sure to check the tips shown here to help you as you do this repair.

  • Your engine should be completely cold before you replace your spark plugs. You should wait at least 30 minutes after any kind of operation before attempting to replace the spark plugs on your 2015 Nissan Rogue
  • During this process, one of the most vital things to ensure you do is to avoid overtightening the plugs or worse, cracking them due to overtightenting. Use a torque wrench capable of lower, more precise torque ratings to be sure that you don’t make this mistake.
  • Before starting, disconnect the negative terminal of your battery. You should always disconnect the battery anytime you work on the electrical system of your Nissan Rogue or any other vehicle.
  • Note that this is not official advice as many spark plug manufacturers advise against the use of anti-seize. However, I have heard from numerous old-school mechanics that they always apply a tiny amount of anti-seize to the threads of their spark plugs, especially on older vehicles.
  • You might consider using dielectric grease when installing new spark plugs. You can apply a a little bit to the inside of the boot and the ceramic part of your spark plugs. It lessens the chance of voltage leak and helps avoid the misfortune of the boot fusing to the spark plug over time.

Leave a Comment